Assembly Instructions Helmet Mount

Tools needed

Phillips screwdriver

Drill with 3/16” drill bit

3/8” wrench

Level

Installation Instructions

1. Assembled the 3 pieces of the helmet mount together using the hardware provided. A phillips screwdriver and 3/8” wrench will be needed to tighten everything together.

2.Hold the completed assembly against the wall where you want to hand using a level to keep everything straight.

 

3. Once it is in the right position mark the mounting locations.

 

4.Drill holes for the drywall anchors using a 3/16” drill bit.

 

5. Insert the drywall anchors.

 

6. Secure the helmet mount to the wall using the remaining hardware provided.