Skateboard Deck Mount Assembly Instructions

1. Hold the bracket on the wall where you want to mount the skateboard deck. Mark the hole locations on the wall.

 

2. Using a 3/16” drill bit, drill holes in the wall.

 

3. Insert the anchors in the holes. Press them in until they are flush with the wall. (Note: If there is stud in the wall where you are placing the mount, the anchors are not needed.)

 

 

4. Using the 1” screws, secure the mount to the wall.

 

 

5. Using the ¾” screws, secure the deck to the mount.